WHEN YOUR HOT WATER SYSTEM ABRUPTLY CEASES WORKING: WHAT TO DO

When Your Hot Water System Abruptly Ceases Working: What to Do

When Your Hot Water System Abruptly Ceases Working: What to Do

Blog Article

Call

Were you searching for content around How to Troubleshoot and Repair an Electric Water Heater?


What Would Cause My Electric Water Heater to Stop Working?
Lots of contemporary houses use an electrical hot water heater for their furnace, due to its convenience and ease of use. Nevertheless, much like any other electric appliances, troubles might emerge with its usage, unexpectedly. It can be actually frustrating to wake up to a cool shower rather than a warm one or having your bathroom with water that isn't hot sufficient and even as well warm. Whatever the situation may be, hot water heater issues can be quite nerve-racking. The good news is, we have actually made a list of possible solutions to your hot water heater concerns. There are a variety of elements that can create a number of these problems, it could be an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the main power supply for security. Whatever the trouble is, getting it dealt with must not position too much of a concern if you comply with these steps:

Call An Expert:


If after replacing all damaged components and resetting your temperature, the water heater still isn't working, you might require to call a specialist plumber for an expert point of view. The trouble with your heating system could be that the hot and cold faucets have been switched over or it might be undersized for the amount of warm water needed in your house. Whatever the case may be, a professional plumber would assist address the trouble.

Examine Your Power Supply:


As fundamental as this might appear, it is extremely needed. Without sufficient power, your water heater will certainly not function. So the first thing to do when your water unexpectedly retires is to verify that it isn't a power trouble. Check if the fuse is burnt out or the circuit breaker tripped. If the circuit breaker is the problem, just transform it on and off once again. Change any kind of damaged or worn-out fuse. Evaluate the home appliance with power after these changes to see if it's now functioning.

Inspect Your Thermostat:


If your hot water heater still isn't working or the water appearing isn't warm sufficient, you might require to examine the temperature setups on your top thermostat. Ensure the circuit breaker is turned off before doing anything. Open the accessibility panel and also press the red switch for temperature reset over the thermostat. This should help heat up the water. Turn the breaker back on as well as examine if the problem has actually been resolved.

Examine the Heating Element in the Water Heater:


If it's not a power issue, then attempt looking into your burner if it is still functioning. Test each of your heating elements to make sure the issue isn't with any one of them. If any one of them is malfunctioning, change that component and after that inspect whether the hot water is back on.

Final thought


Water heater issues are not constantly major. Much of them result from small problems like a blown fuse or worn-out heating element. Replacing the faulty parts ought to do the trick. However, if you are still unable to address the trouble, give a call to your local plumber ahead to get it taken care of.


Common Water Heater Issues and What You Should Do


What Type of Water Heater Do You Have?


Before we begin it’s first important that you identify the type of water heater you have on your property. There are two main types of water heaters out there: conventional and high efficiency.



Both of these types of products typically use either gas or electricity to heat power. There are also solar water heaters that use a thermal collector on the roof or yard to heat the water.



While these models are not as common, they can cut heating costs in half. In this article, we will focus on conventional and high efficiency.


How Do My Electric and Gas Water Heater Work?


Though they look similar, electric and gas water heaters work very differently. It’s important to know their basic function because often problems can be specific to the heating source.



In the electric model, a thermostat on the side of the machine detects the temperature of the water in the tank. When the temperature needs to rise electricity flows to a heating element suspended in the water.



Gas models also use a thermostat device — typically with a mercury sensor at the tip and an additional sensor called a thermocouple. The thermocouple detects whether the pilot light is on and controls the flow of gas.



When the thermostat drops below the appropriate level gas is released which becomes ignited by the pilot light. The flame heats the bottom of the water tank which causes hot water to rise and cold water to drop.



This natural circulation continues until the water reaches the desired temperature. Then, the thermostat triggers the gas control valve to shut off the flow of gas.


What Are the Most Common Issues and How Do You Fix Them?


n this section, we’ll go over some of the more common problems that people deal with when their water heater starts acting up. Keep in mind that some problems, like a broken pilot light, are specific to gas water heaters.



Also, remember that the best defense against water heater issues is regular maintenance. Check out some of these great tips for improving the lifespan of your water heater.


Not Enough Hot Water


This problem is common if you live in an apartment or a house with a lot of people. Too many people use the hot water supply in the tank and the machine struggles to produce more in a timely fashion.



There’s a variety of solutions to this problem, but an easy method is simply to adjust the temperature dial on your heater and wait thirty minutes.



If you have an electrical water heater, then a power surge caused by the device may cause the circuits to trip.



You should contact an electrician quickly if this issue keeps happening — it means wiring issues are causing the machine to draw more power than it needs. You may also want to try draining your water heater.



The process of draining removes the hard water sediments that cause your machine to run less efficiently. If you want a full walk-through of how to drain water your water heater tank, then make sure to read our article before you begin.



If none of these solutions fix the problem, then the issue likely lies in a malfunction component — likely a pressure relief valve or heating element.


Changing Water Temperatures


Often it’s a joke that some showers have two temperatures: scolding hot and ice cold. Unfortunately, this common feature can be a symptom of a bigger problem.



If you notice this temperature change when you shower or do the dishes, then you should check the thermostat on the side of your water heater. First, make sure it’s set to your desired temperature.



If it still exhibits drastic temperature changes, then you may need to replace the thermostat or the heating unit inside the product. The problem may also lie in the size of the product. Remember that tanks should hold roughly 20 gallons of water per person living in the house.


A Leak in the Water Heater


A water heater leak can cause serious water damage to the floor and electrical components near the device. Remember that you should always turn off the gas or electricity and let the device cool down before inspecting for a problem.



You may be able to fix the leak by tightening screw and pipe connections as these are common causes of minor leaks. However, if you notice a substantial leak at the base of the water heater, then you should contact a technician to inspect and replace it.


Rumbling Sounds


Rumbling sounds are a sign of a serious water heater issue. Unusual sounds may come from burning sediments or malfunction heating components. If you think you hear your heater boiling, then you should turn it off immediately.



This symptom is a sign of building pressure in your tank which could cause it to explode. You can likely solve this problem by draining your tank and clearing out any sediments. However, if the problem persists you may want to call a professional.


Rusty or Smelly Water


If your water smells then there is likely rust or bacteria in your water tank. These problems can cause orange discoloration and a smell like rotten eggs. However, you should first make sure that your tank is the issue and not the water source itself.



Run cold water and see if the smell persists. If the smell only comes from hot water, then the problem is the water heater. If not, then it’s the water source. If the problem comes from your tank, then it’s likely a malfunctioning anode rod.



An anode rod is responsible for cleaning any bacteria from the tank, so this is the most likely symptom. Unfortunately, changing an anode rod requires extensive knowledge of the system. As such, you will likely need the help of a professional.


Poor Water Flow


Changes in the water pressure that comes out of your shower or sink is likely a sign of sediment buildup at the bottom. Follow our previous advice — drain the tank and flush out any of the sediments.



If the problem persists, then you’ll need to check the pipes around your device. Hire a professional plumber to clean or replace the pipes around the water heater.


No Pilot Light


Gas water heaters require a pilot light to ignite the gas that warms the water. If your pilot light is out, then try reigniting it by repeatedly switching the ignitor switch. If your pilot light continues to go out, then it’s a symptom of a larger problem.



You can first try cleaning it — sometimes dirt or grime can buildup and snuff out the spark.



However, the problem can also cause things like malfunctioning thermostats, broken gas valves, or air in the gas line. First, try cleaning it and if it still goes out, then troubleshoot the various parts and replace whichever one malfunction.

https://happyhiller.com/blog/common-water-heater-issues-and-what-you-should-do/


How to Troubleshoot and Repair an Electric Water Heater

We are very occupied with No Hot Water — Water Heater Repair and I hope you enjoyed reading the entire blog entry. Appreciated our blog entry? Please share it. Let somebody else find it. I treasure reading our article about Hot Water Heater Repair.


Expert diagnostics offered.

Report this page